HOBBES NETmapper

513.42 € without VAT

Displays the Ethernet port status, ping default router, ping DNS server and ping user defined device… Incorporates TDR technology.
On–line test: Displays the Ethernet port status, ping default router, ping DNS server and ping user defined device…etc.
Off–line test: Wire map/twisted mapping/cable length/tone generator and port–finder.
Reporting voltage and polarity if voltage is present on pin 4/5 (telephone line).
Wire map for cables opened, shorted, reversed, crossed, split pairs, mis–wire, ad shield continuity.
Wire map results are displayed by pin–to–pin format.
Displays the wire map and cable faults with remote ID in one screen.
Measures twisted pairs, map, and length of Cat5, Cat5E, Cat6 and Cat7 cables without remotes.
Self–calibrating function allows for increased measuring accuracy when testing length of non–standard cables.
Displays measurements in both meters and ft.
Port-finder function to locate corresponding socket on 10/100M or Giga hub/switch.
Tone generator sends 1kHz tone on all pins with 4 tonalities.
RJ-45 port protection from damage due to high voltage from telephone line.
Low battery indicator.

SPECIFICATIONS

– Display: 128 x 64 dot matrix LCD
– Connector type: RJ-45 (main and remote)
– Accuracy: +2m less than 10m (+6.56 ft. in less than 32.81 ft.), +5% over 10m (32.81ft.)
– Test range for cable length: 1 to 300m (3 to 984 ft.)
– Split pairs detection: minimum 1m (3ft.)
– Tone generator: 1kHz
– Operating temp. : 0°C to 50°C (–22°F to 122°F)
– Storage temp. : – 30°C to 50°C (–22°F to 122°F)
– Humidity: 10% to 90%
– Master Dimensions: 110 x 78 x 31mm
– Remote Dimensions: 44 x 32 x 28.5mm
– Weight: 115g
– Battery: 6V; 4 x AAA Alkaline batteries