Heater with fan for cabinets, DIN mount 150W, 250W, 400W

100.10 € – 117.35 € without VAT

Heater with fan for outdoor cabinets, mounted on DIN rail 150W, 250W, 400W. Temperature fluctuations are the main and most common cause of condensate accumulation. The efficient and safe operation of the equipment installed in the cabinet under such conditions is ensured by the use of heaters. At sub-zero temperatures, the heater protects the outdoor cabinet from freezing and from the accumulation of condensate. Heaters with a fan ensure the right temperature in the closet, and due to their ventilated design, they are smaller and compact, so they fit even in small closets where space is limited.

Size:

150W – 75x65x90mm

250W and 400W- 90x85x111mm

Voltage: 230VAC, 50/60Hz

Heating element PTC resistor

Surface temperature 150W/250W: max. +50°C (+122°F), 400W: max. +65°C (+149°F) except for the upper protective grill at +20°C (+68°F) ambient temperature

Axial fan

Air flow: 45 m³/h (230 VAC), 54 m³/h (120 VAC)

Service life 40,000 hours. at +40°C (+104°F)

Connector 2-pole clamp max. 2.5 mm², tightening screw torque 0.8 Nm max.

Plastic housing according to UL94 V-0, black

Fixing clip for 35 mm DIN rail, EN 60715 or screw fixing (Ø 5.3 mm)

Operating/storage temperature -45 to +70 °C (-49 to +158 °F)

Operating/storage humidity max. 90% RH (non-condensing)

Type of protection / Protection class IP20 / II (double insulation)